Fluidyne "Ultra-Thin Line ", light weight 12V fans are a must for fluid cooling applications. Your radiator's performance is only as good as the airflow moving through it. Not coupled to your engine RPM, these universal electric fans will provide a constant airflow through your radiator in stop and go traffic. The Thin Line profile will fit where most stock electric and clutch fans will not. Lightweight space-age plastic coupled with sealed high efficiency motors assures peak performance and durability. We include Fluidyne's mounting hardware kit with each fan at no extra charge.

Maradyne's High Performance Reversible Fans are low profile, 12 volt universal mount fans that can be used as pusher fans or puller fans. Maradyne fans are all individually balanced for top Performance and Efficiency. Used as a primary fan, you will free up wasted horsepower and extend water pump life. Use as a pusher type fan, mounted in front of radiator, to add additional cooling capacity to avoid overheating. An excellect choice for applications with minimal clearance between radiator and engine. The 9", 10", 11" and 12" fans come in a chose of Black, Red or Blue. Only the outer fan shroud is colored Red or Blue, all fan blades are Black. All kits include fan, mounting feet & instructions. Only fans marked with "*" come with pull tie mounting kit. All Maradyne fans are waterproof, except those marked with red "**".

Northern's High Performance Reversible Fans are low profile, 12 volt universal mount fans that can be used as pusher fans or puller fans. Used as a primary fan, you will free up wasted horsepower and extend water pump life. Use as a pusher type fan, mounted in front of radiator, to add additional cooling capacity to avoid overheating. An excellect choice for applications with minimal clearance between radiator and engine. All kits include fan, pull tie mounting kit & instructions.

SPAL fans are high quality 12v electric fans which exceed OEM standards. They are lightweight yet have proven reliability.The low profile of these fans is just what's needed in the limited space applications of todays high performance automobile. SPAL fans are available in BLACK only and do not come with pull tie mounting kits. For a full line of SPAL mounting accessories, please see the seperate listings at the bottom of this page. SPAL's fan specs can be viewed by clicking on the "here" tab for each listing. Adobe Reader, which can be downloaded here, will be needed to view these specs. We also have a SPAL part # conversion chart here, to convert from their old part number to their new number.

Maradyne's Mach Two Series of fans uses two 225 watt high performance fans mounted in a glass-filled nylon constructed shroud. Used as a primary fan, instead of a belt driven fan, you will free up wasted horsepower and extend water pump life. These are designed to fit most GM gross-flow radiators that have a minimum size of 23.5" x 15.75". These fan assemblies come in three different mounting styles: with top and mounting flanges, with side mounting flanges, without mounting flanges (uses pull tie mounting). These fan assemblies measure 23.5" wide X 15.75" high (not including mounting flanges).

Maradyne's Mach One Series of fans uses one 225 watt high performance fan mounted in a glass-filled nylon constructed shroud with a rubber seal to eliminate vibration contact and increase air flow. Dust and water proof to IP68. Quiet S-blade design. This fan assembly measures16" wide x 17" high. Includes universal mounting brackets.

Northern's Dual Fan/Shroud Combo solves the problem of how to mount two fans on a radiator without damaging the delicate fins of the radaitor. This is accomplished by mating two SPAL fans to a Nothern fan shroud for a clean, perfessional look. The shroud is made of fully formed, .090" aircraft aluminum. The combined power of the two SPAL 12" fans are 2400 CFM, with a total amperage draw of only 14 amps. The shrouds dimensions are 28" wide X 17 1/4" high with a depth of 2 5/8"

Universal electric radiator fan mounting kit, features brackets for mounting your electric fan to the side straps or fan shroud mounting bosses, instead of risking damage to the delicate radiator core. These brackets are blue anodized aluminum.

Universal Pull Tie Fan Mounting Kits allow for easy installation of aftermarket electric fans. They come with 4 sets of pul ties and recepticles, 8 foam rubber cushions to protect the radiator, and 4 springs to cushion shock.

Maradyne Adjustable Fan Control Kits are designed to turn radiator fans off and on according to your controller setting. The adjustable thermostat allows you to set the controller according to your specific needs. Kit includes wiring harness with built-in fuse holder and fuse, relays, adjustable thermostat with capilary type sensor and mounting bracket.

This harness/thermostat kit was designed to eliminate common problems that occu r with the installation of electric cooling fans. The kit consists of a high-quality wiring harness with labeled cables, OE-type thermostat with a Packard Weather Pack connector, detailed installation instructions, Hella 40-amp relay, inline fuse holder, 3/8" to 1/2" pipe adaptor and all necessary hardware. The 195 degree thermostat is designed to turn on at 195 degrees and turn off at 175 degrees. The thermostat, with a 3/8" stainless steel pipe thread body and a 1/2" pipe adaptor, can mount in the cylinder head of the engine, thermostat housing or anywhere else in the cooling system that an accurate tempurature reading can be recorded. The wiring harness plugs directly into SPAL, Fluidyne and Maradyne fan harnesses.

SPAL offers several fan wiring kits to make your fan installation project easier and turn out cleaner:

• Pigtail With 'AMP' Connector - This is a simple harness with a 'AMP' style connector on the end to connet directly to SPAL fan connectors except 4", 5.2", 5.6" & the 2 listed below. The 'AMP' connector is a standard connector that also works on may other brands of fans.
  
• Pigtail With Metric-Pack 280 Connector - Same as above, except has a metric waterproof connector for use with SPAL 30102113 & 30102130 fans only.

SPAL offers a variety of mounting accessories to make your fan installation project go smoothly. These accessories include mounting feet of varying dimensions that snap onto all SPAL fans over 5.6". While these mounting feet are not required, (SPAL fans have built-in mounting feet), these mounting feet can be very helpful in bridging that extra gap to reach a secure mount surface. SPAL mounting feet are an industry standard and will work on many other fans made by other manufacturers. SPAL also offers a universal Fan Mounting Brackets. This bracket are adjustable and have a black powdercoat finish. SPAL also offers Fan Mounting Pins. These pins take the place of plastic pull tie kits, but are make of metal. These mounting pins are very popular for the 10" and smaller fans, allowing for the fans to be attached directly to the core.

This water resistant controller is programmable, and will vary the speed of your fan, based on engine temperrature by using Pulse Width Modulation technology. A second fan can be added, but requires the use of an additional relay (not included) to control the secondary fan. The secondary fan will not be variable speed: it will be ON/OFF only.

Features:

• Programmable to activate at any temperature
• Three optional Factory set default temp ranges when using optional SPAL sensor
• Variable speed for reduced fan noise and decreased current draw
• Smart fan Diagnostics detects stalled or over-current fans
• New 16 bit MCU
• Uses OEM or optional SPAL Temperature Sensor
• Waterproof extruded aluminum construction
• Onboard status LEDs and status output
• Capable of both 12VDC and 24VDC operation

This fully waterproof controller is designed to safely and correctly stop and reverse fan rotation. This feature offers a clean-out cycle for cooling systems used in high dust an debris environments.

Features:

• Connects directly to SPAL fan (waterproof connector)
• Optional sensor port
• 25 AMP circuit rating
• Durable aluminum enclosure (waterproof)
• Dynamic fan spindown